메뉴 건너뛰기

창작에 관련된 질문이나 간단한 팁, 예제를 올리는 곳

안녕하세요, 노루발입니다.

오늘로 그래픽 소코반을 끝내기로 했습니다.

아쉽지만 끝내야죠.


일단 걸음수와 이것저것을 뿌려주기로 합니다.

그런데 이미 화면이 꽉 차버려서 뿌려줄 공간이 없네요...

없으면 만들면 되지. 창을 늘립시다.


conf.lua를 수정.


function love.conf(t)
    t.title = "Lua 소코반 EX!"
    t.screen.width = 256
    t.screen.height = 288
end


세로를 32 더 늘렸습니다.


그리고 한글을 출력하고 싶으면 한글 폰트가 있어야 합니다.

'은바탕' 폰트를 첨부해 두었습니다.


function love.load()
    tile = love.graphics.newImage("nokoban.png")
    -- 쿼드 만들기
    tileq = {}
    for a = 1, 6 do
        tileq[a] = love.graphics.newQuad(32 * (a - 1), 0, 32, 32, 192, 32)
    end
   
    -- 폰트 불러오기
    korfont = love.graphics.newFont("UnBatang.ttf", 15) -- 은바탕 폰트, 15 크기로 불러온다.
end


그리고 love.draw 콜백에서 그립니다.

function love.draw()
    tempbuffer = 0
    for a = 1, 8 do
        for b = 1, 8 do
            if (map[a][b] == 0) then
                tempbuffer = 3
            elseif (map[a][b] == 1) then
                tempbuffer = 2
            end
           
            for c = 1, #box do
                if (box[c]["x"] == b and box[c]["y"] == a) then
                    tempbuffer = 5
                    break
                end
            end
           
            for c = 1, #goal do
                if (goal[c]["x"] == b and goal[c]["y"] == a) then
                    if (tempbuffer == 5) then -- 상자와 목표 지점이 겹친다면
                        tempbuffer = 6
                    else
                        tempbuffer = 4
                    end
                    break
                end
            end
           
            if (playerx == b and playery == a) then
                tempbuffer = 1
            end
           
            -- 그린다
            love.graphics.drawq(tile, tileq[tempbuffer], (b - 1) * 32, (a - 1) * 32)
        end
    end
   
    -- 글씨를 쓴다.
    love.graphics.setFont(korfont)
    love.graphics.print("움직임: "..moves, 0, 255)
    if (successed() == true) then
        love.graphics.print("축하합니다.", 0, 270)
    else
        love.graphics.print("a: 왼쪽 s: 아래 d: 오른쪽 w: 위", 0, 270)
    end
end


모든 상자가 목표 위에 올라간 상태라면 축하 메세지를 띄우고

아니라면 조작을 설명하는 메세지를 띄웁니다.



function love.keypressed(key)
    if (successed() == false) then
        if (key == "a") then

~~ 너무 길어서 이하 생략


모든 상자가 목표 위에 올라간 상태가 아닐 경우에만 조작의 처리를 실행합니다.

모든 상자가 목표 위에 올라가 있다면 조작의 처리가 실행되지 않습니다.


완성된 버젼의 전체 코드를 요약글로 올립니다.

conf.lua:

function love.conf(t)
    t.title = "Lua 소코반 EX!"
    t.screen.width = 256
    t.screen.height = 288
end


main.lua:

-- 플레이어 위치를 저장하는 변수
-- 초기 시작지점은 5, 5로 설정.
playerx = 5
playery = 5

-- 박스의 위치를 저장하는 배열.
box = {}

-- 박스 목표 지점의 위치를 저장하는 배열.
goal = {}

-- 움직인 횟수 저장
moves = 0

-- 맵 데이터를 저장하는 8*8의 2차원 배열 Map 생성
map = {}
for a = 1, 8 do
    map[a] = {}
    for b = 1, 8 do
        map[a][b] = 0
    end
end

function makebox(x, y)
-- 새 박스를 만든다.
    box[#box + 1] = {}
    box[#box]["x"] = x
    box[#box]["y"] = y
end

function makegoal(x, y)
-- 새 목표 지점을 만든다.
    goal[#goal + 1] = {}
    goal[#goal]["x"] = x
    goal[#goal]["y"] = y
end

function successed()
-- 모든 박스가 목표 지점 위에 놓여 있는가?
for a = 1 , #goal do
    if boxexist(goal[a]["x"], goal[a]["y"]) == 0 then
        return false
    end
end
return true
end

-- 맵 데이터 초기화
for a = 1, 8 do
    for b = 1, 8 do
        if (a == 1 or a == 8 or b == 1 or b == 8) then
            map[a][b] = 1
        end
    end
end

makebox(4,3)
makebox(4,6)

makegoal(5, 3)
makegoal(5, 6)

function boxexist(x, y)
    for a = 1, #box do
        if (box[a]["x"] == x and box[a]["y"] == y) then
            return a
        end
    end
    return 0
end

function love.load()
    tile = love.graphics.newImage("nokoban.png")
    -- 쿼드 만들기
    tileq = {}
    for a = 1, 6 do
        tileq[a] = love.graphics.newQuad(32 * (a - 1), 0, 32, 32, 192, 32)
    end
   
    -- 폰트 불러오기
    korfont = love.graphics.newFont("UnBatang.ttf", 15)
end

function love.draw()
    tempbuffer = 0
    for a = 1, 8 do
        for b = 1, 8 do
            if (map[a][b] == 0) then
                tempbuffer = 3
            elseif (map[a][b] == 1) then
                tempbuffer = 2
            end
           
            for c = 1, #box do
                if (box[c]["x"] == b and box[c]["y"] == a) then
                    tempbuffer = 5
                    break
                end
            end
           
            for c = 1, #goal do
                if (goal[c]["x"] == b and goal[c]["y"] == a) then
                    if (tempbuffer == 5) then -- 상자와 목표 지점이 겹친다면
                        tempbuffer = 6
                    else
                        tempbuffer = 4
                    end
                    break
                end
            end
           
            if (playerx == b and playery == a) then
                tempbuffer = 1
            end
           
            -- 그린다
            love.graphics.drawq(tile, tileq[tempbuffer], (b - 1) * 32, (a - 1) * 32)
        end
    end
   
    -- 글씨를 쓴다.
    love.graphics.setFont(korfont)
    love.graphics.print("움직임: "..moves, 0, 255)
    if (successed() == true) then
        love.graphics.print("축하합니다.", 0, 270)
    else
        love.graphics.print("a: 왼쪽 s: 아래 d: 오른쪽 w: 위", 0, 270)
    end
end

function love.keypressed(key)
    if (successed() == false) then
        if (key == "a") then
            if (map[playery][playerx - 1] == 0) then
                if (boxexist(playerx - 1, playery) ~= 0) then
                    if (boxexist(playerx - 2, playery) == 0) then
                        if map[playerx - 2][playery] == 0 then
                            box[boxexist(playerx - 1, playery)]["x"] = box[boxexist(playerx - 1, playery)]["x"] - 1
                            playerx = playerx - 1
                            moves = moves + 1
                        end
                    end
                else
                    playerx = playerx - 1
                    moves = moves + 1
                end
            end
        elseif (key == "s") then
            if (map[playery + 1][playerx] == 0) then
                if (boxexist(playerx, playery + 1) ~= 0) then
                    if (boxexist(playerx, playery + 2) == 0) then
                        if map[playerx][playery + 2] == 0 then
                            box[boxexist(playerx, playery + 1)]["y"] = box[boxexist(playerx, playery + 1)]["y"] + 1
                            playery = playery + 1
                            moves = moves + 1
                        end
                    end
                else
                    playery = playery + 1
                    moves = moves + 1
                end
            end
        elseif (key == "d") then
            if (map[playery][playerx + 1] == 0) then
                if (boxexist(playerx + 1, playery) ~= 0) then
                    if (boxexist(playerx + 2, playery) == 0) then
                        if map[playerx + 2][playery] == 0 then
                            box[boxexist(playerx + 1, playery)]["x"] = box[boxexist(playerx + 1, playery)]["x"] + 1
                            playerx = playerx + 1
                            moves = moves + 1
                end
                    end
                else
                    playerx = playerx + 1
                    moves = moves + 1
                end
            end
        elseif (key == "w") then
            if (map[playery - 1][playerx] == 0) then
                if (boxexist(playerx, playery - 1) ~= 0) then
                    if (boxexist(playerx, playery - 2) == 0) then
                        if map[playerx][playery - 2] == 0 then
                            box[boxexist(playerx, playery - 1)]["y"] = box[boxexist(playerx, playery - 1)]["y"] - 1
                            playery = playery - 1
                            moves = moves + 1
                        end
                    end
                else
                    playery = playery - 1
                    moves = moves + 1
                end
            end
        end
    end
end


조회 수 :
913
등록일 :
2013.09.18
08:05:48 (*.209.135.92)
엮인글 :
게시글 주소 :
https://hondoom.com/zbxe/index.php?mid=study&document_srl=703968
List of Articles
번호 제목 글쓴이 조회 수 추천 수 날짜 최근 수정일sort
25 RPG Maker MV 로컬라이징 방법 file 똥똥배 927   2015-10-27 2015-10-27 05:51
 
24 김프로 이미지 맵 만들기 노루발 393   2015-11-11 2015-11-11 08:05
https://docs.gimp.org/en/plug-in-imagemap.html  
23 Love2d 게임 중간에 광고 표시 [1] 노루발 377   2015-11-12 2015-11-17 00:16
http://love2d.org/forums/viewtopic.php?f=11&t=81224  
22 Love2d DPI 이슈 해결 [3] 노루발 97   2019-06-29 2019-07-01 06:34
이런 love 프로젝트가 있다고 하자. (conf.lua) function love.conf(t) t.window.width = 640 t.window.height = 360 end 창 크기를 640*480으로 설정한 뒤 실행하면 어떻게 보일까? 당연히 창 크기가 640*480 크기로 보여야겠지만 내 컴퓨터에서는 이렇게 보...  
21 Windows To Go와 R-Studio를 이용한 손실된 데이터 복구하기 노루발 90   2020-01-30 2020-01-30 19:52
하기의 복구 방법으로 모든 자료를 100% 복구할 수는 없으므로 자료의 손실 이전에 신뢰성 있고 주기적인 백업이 선행되어야 한다. 준비물: - 부팅 USB 혹은 외장 HDD/SSD - 복구한 자료를 저장할 외부 저장장치 (옵션) - R-Studio https://www.r-studio.com/ ...  
20 Lua 인수로 nil값이 들어왔을 경우 처리하기 노루발 58   2020-11-06 2020-11-06 20:29
or 연산자를 사용한다. 예제 코드: function moveplayer(direction) direction = direction or "nowhere" print("player moved to ".. direction) end moveplayer() --> "player moved to nowhere" moveplayer("north") -- "player moved to north" 이런 코드...  
19 Lua 테이블 안에 함수 저장하기 노루발 28   2020-11-06 2020-11-06 21:07
테이블 안에 함수를 저장할 수 있다. function move(object, direction) print(object .. " moved to ".. direction) end scheduler = {} scheduler.queue = {} function scheduler.newentry(action, args) scheduler.queue[#scheduler.queue + 1] = {} schedu...  
18 Lua 클래스 만들고 활용하기 노루발 24   2020-11-06 2020-11-06 22:43
------------------------ stairs.lua ------------------------ Stairs = {} function Stairs:new(x, y, floor, direction, locked) local newStairs = {x = x, y = y, floor = floor, direction = direction, locked = locked} self.__index = self retur...  
17 특정좌표를 기준으로 zoom in/zoom out하기 노루발 59   2020-11-11 2020-11-11 01:22
-- x,y - 줌인/줌아웃시 기준점 (좌표 이동이나 scale에 영향받지 않는 순수한 화면 좌표) -- scale - 현재 scale(1:그대로 0.5:1/2 사이즈 2:2배 사이즈) -- scaleinc - 얼마나 scale을 변화시킬것인가 (I usually use 0.1 or -0.1) -- camx - 카메라의 x좌표...  
16 love2d에서 안드로이드 터치 제스처 인식하기 노루발 20   2020-11-12 2020-11-12 00:38
-- 안드로이드/iOS 등등의 터치스크린 입력을 받는 기기에서는 총 3가지의 콜백 함수를 사용한다: -- love.touchpressed / love.touchmoved / love.touchreleased -- 다만 위 3가지 함수는 마우스 클릭으로는 발생하지 않으므로 추가적인 처리가 필요하다. -- ...  
15 이쁜 눈나가 유니티 개발 알려주는 재생목록 노루발 37   2020-11-12 2020-11-12 05:59
https://www.youtube.com/watch?v=Ur2jN6_si6c&list=PLi-ukGVOag_1lNphWV5S-xxWDe3XANpyE https://www.youtube.com/watch?v=sJClf9S7AMA&list=PLi-ukGVOag_0HR09oTs966Wt81IYYXlFH 유니티를 배우고 있는 건 아닌데 만들어진 라이브러리를 다루는게 아...  
14 턴 기반 시스템 구현에 대한 글 [4] 노루발 440   2020-11-14 2020-11-18 05:49
플레이어와 NPC들의 모든 행동에 1턴이 소요된다면 턴 기반 시스템의 구현이 쉽겠지만 (사실 엄청 쉽지는 않다... 게임엔진은 실시간으로 돌아가는데 행동은 턴으로 제약해야 하니) 전략성을 요구하기 위해 행동에 소모되는 턴을 다르게 설정한다면 다소 생각...  
13 루아 스타일 가이드 노루발 34   2020-11-19 2020-11-19 00:58
http://lua-users.org/wiki/LuaStyleGuide https://github.com/Olivine-Labs/lua-style-guide  
12 Love2d 이미지 하얗게 그리기 노루발 42   2020-11-23 2020-11-23 04:11
아래와 같은 코드를 사용해 이미지에 색상을 적용할 수 있다. hamster = love.graphics.newImage("hamster.png") love.graphics.setColor(1, 0, 0) -- 빨간색으로 그리기 love.graphics.draw(hamster) love.graphics.setColor(1, 1, 1) 하지만 이미지를 하얗게...  
11 Love2d로 만든 로그라이크 예제 노루발 253   2020-11-30 2020-11-30 22:54
https://gitlab.com/Jalexander39/roguelikedev-does-the-complete-roguelike-tutorial 이걸 왜 여태 몰랐지...  
10 Oracle cloud에 Nginx/MariaDB 설치하기 노루발 93   2020-12-06 2020-12-06 20:19
https://itreport.tistory.com/624  
9 리캡챠 적용 [1] 노루발 11   2021-01-08 2021-01-11 12:15
XE 회원가입 시 구글 리캡챠 인증 추가하기 : 네이버 블로그 (naver.com)  
8 자동화된 Lua 스크립트의 문서화 - LDoc 노루발 43231   2021-01-11 2021-01-11 11:53
다운로드 https://github.com/lunarmodules/LDoc penlight 설치가 필요 luarocks install penlight 프로젝트가 있는 폴더에서 아래의 명령행을 실행 lua /path/to/ldoc/ldoc.lua $* https://stevedonovan.github.io/ldoc/manual/doc.md.html 문서 코멘트라는걸...  
7 Love2d 게임 안드로이드로 패키징하기 노루발 49   2021-01-11 2021-02-21 01:45
http://hondoom.com/zbxe/index.php?mid=study&document_srl=797993 버전이 바뀌면서 빌드 방법이 바뀌었기에 다시 정리한다. 1. Android studio 설치 https://developer.android.com/studio/index.html SDK 플랫폼 - Android 11.0 [API 30] SDK 버전 - An...  
6 certbot을 이용한 HTTPS 인증서 발급 및 적용 노루발 18   2021-01-12 2021-01-12 16:57
snap 설치 및 업데이트 sudo snap install core; sudo snap refresh core certbot 설치 sudo snap install --classic certbot 심볼릭 링크 생성 sudo ln -s /snap/bin/certbot /usr/bin/certbot nginx에 맞춰 자동 설정 sudo certbot --nginx 알아서 다 해주기...