메뉴 건너뛰기

창작에 관련된 질문이나 간단한 팁, 예제를 올리는 곳

안녕하세요, 노루발입니다.

오늘로 그래픽 소코반을 끝내기로 했습니다.

아쉽지만 끝내야죠.


일단 걸음수와 이것저것을 뿌려주기로 합니다.

그런데 이미 화면이 꽉 차버려서 뿌려줄 공간이 없네요...

없으면 만들면 되지. 창을 늘립시다.


conf.lua를 수정.


function love.conf(t)
    t.title = "Lua 소코반 EX!"
    t.screen.width = 256
    t.screen.height = 288
end


세로를 32 더 늘렸습니다.


그리고 한글을 출력하고 싶으면 한글 폰트가 있어야 합니다.

'은바탕' 폰트를 첨부해 두었습니다.


function love.load()
    tile = love.graphics.newImage("nokoban.png")
    -- 쿼드 만들기
    tileq = {}
    for a = 1, 6 do
        tileq[a] = love.graphics.newQuad(32 * (a - 1), 0, 32, 32, 192, 32)
    end
   
    -- 폰트 불러오기
    korfont = love.graphics.newFont("UnBatang.ttf", 15) -- 은바탕 폰트, 15 크기로 불러온다.
end


그리고 love.draw 콜백에서 그립니다.

function love.draw()
    tempbuffer = 0
    for a = 1, 8 do
        for b = 1, 8 do
            if (map[a][b] == 0) then
                tempbuffer = 3
            elseif (map[a][b] == 1) then
                tempbuffer = 2
            end
           
            for c = 1, #box do
                if (box[c]["x"] == b and box[c]["y"] == a) then
                    tempbuffer = 5
                    break
                end
            end
           
            for c = 1, #goal do
                if (goal[c]["x"] == b and goal[c]["y"] == a) then
                    if (tempbuffer == 5) then -- 상자와 목표 지점이 겹친다면
                        tempbuffer = 6
                    else
                        tempbuffer = 4
                    end
                    break
                end
            end
           
            if (playerx == b and playery == a) then
                tempbuffer = 1
            end
           
            -- 그린다
            love.graphics.drawq(tile, tileq[tempbuffer], (b - 1) * 32, (a - 1) * 32)
        end
    end
   
    -- 글씨를 쓴다.
    love.graphics.setFont(korfont)
    love.graphics.print("움직임: "..moves, 0, 255)
    if (successed() == true) then
        love.graphics.print("축하합니다.", 0, 270)
    else
        love.graphics.print("a: 왼쪽 s: 아래 d: 오른쪽 w: 위", 0, 270)
    end
end


모든 상자가 목표 위에 올라간 상태라면 축하 메세지를 띄우고

아니라면 조작을 설명하는 메세지를 띄웁니다.



function love.keypressed(key)
    if (successed() == false) then
        if (key == "a") then

~~ 너무 길어서 이하 생략


모든 상자가 목표 위에 올라간 상태가 아닐 경우에만 조작의 처리를 실행합니다.

모든 상자가 목표 위에 올라가 있다면 조작의 처리가 실행되지 않습니다.


완성된 버젼의 전체 코드를 요약글로 올립니다.

conf.lua:

function love.conf(t)
    t.title = "Lua 소코반 EX!"
    t.screen.width = 256
    t.screen.height = 288
end


main.lua:

-- 플레이어 위치를 저장하는 변수
-- 초기 시작지점은 5, 5로 설정.
playerx = 5
playery = 5

-- 박스의 위치를 저장하는 배열.
box = {}

-- 박스 목표 지점의 위치를 저장하는 배열.
goal = {}

-- 움직인 횟수 저장
moves = 0

-- 맵 데이터를 저장하는 8*8의 2차원 배열 Map 생성
map = {}
for a = 1, 8 do
    map[a] = {}
    for b = 1, 8 do
        map[a][b] = 0
    end
end

function makebox(x, y)
-- 새 박스를 만든다.
    box[#box + 1] = {}
    box[#box]["x"] = x
    box[#box]["y"] = y
end

function makegoal(x, y)
-- 새 목표 지점을 만든다.
    goal[#goal + 1] = {}
    goal[#goal]["x"] = x
    goal[#goal]["y"] = y
end

function successed()
-- 모든 박스가 목표 지점 위에 놓여 있는가?
for a = 1 , #goal do
    if boxexist(goal[a]["x"], goal[a]["y"]) == 0 then
        return false
    end
end
return true
end

-- 맵 데이터 초기화
for a = 1, 8 do
    for b = 1, 8 do
        if (a == 1 or a == 8 or b == 1 or b == 8) then
            map[a][b] = 1
        end
    end
end

makebox(4,3)
makebox(4,6)

makegoal(5, 3)
makegoal(5, 6)

function boxexist(x, y)
    for a = 1, #box do
        if (box[a]["x"] == x and box[a]["y"] == y) then
            return a
        end
    end
    return 0
end

function love.load()
    tile = love.graphics.newImage("nokoban.png")
    -- 쿼드 만들기
    tileq = {}
    for a = 1, 6 do
        tileq[a] = love.graphics.newQuad(32 * (a - 1), 0, 32, 32, 192, 32)
    end
   
    -- 폰트 불러오기
    korfont = love.graphics.newFont("UnBatang.ttf", 15)
end

function love.draw()
    tempbuffer = 0
    for a = 1, 8 do
        for b = 1, 8 do
            if (map[a][b] == 0) then
                tempbuffer = 3
            elseif (map[a][b] == 1) then
                tempbuffer = 2
            end
           
            for c = 1, #box do
                if (box[c]["x"] == b and box[c]["y"] == a) then
                    tempbuffer = 5
                    break
                end
            end
           
            for c = 1, #goal do
                if (goal[c]["x"] == b and goal[c]["y"] == a) then
                    if (tempbuffer == 5) then -- 상자와 목표 지점이 겹친다면
                        tempbuffer = 6
                    else
                        tempbuffer = 4
                    end
                    break
                end
            end
           
            if (playerx == b and playery == a) then
                tempbuffer = 1
            end
           
            -- 그린다
            love.graphics.drawq(tile, tileq[tempbuffer], (b - 1) * 32, (a - 1) * 32)
        end
    end
   
    -- 글씨를 쓴다.
    love.graphics.setFont(korfont)
    love.graphics.print("움직임: "..moves, 0, 255)
    if (successed() == true) then
        love.graphics.print("축하합니다.", 0, 270)
    else
        love.graphics.print("a: 왼쪽 s: 아래 d: 오른쪽 w: 위", 0, 270)
    end
end

function love.keypressed(key)
    if (successed() == false) then
        if (key == "a") then
            if (map[playery][playerx - 1] == 0) then
                if (boxexist(playerx - 1, playery) ~= 0) then
                    if (boxexist(playerx - 2, playery) == 0) then
                        if map[playerx - 2][playery] == 0 then
                            box[boxexist(playerx - 1, playery)]["x"] = box[boxexist(playerx - 1, playery)]["x"] - 1
                            playerx = playerx - 1
                            moves = moves + 1
                        end
                    end
                else
                    playerx = playerx - 1
                    moves = moves + 1
                end
            end
        elseif (key == "s") then
            if (map[playery + 1][playerx] == 0) then
                if (boxexist(playerx, playery + 1) ~= 0) then
                    if (boxexist(playerx, playery + 2) == 0) then
                        if map[playerx][playery + 2] == 0 then
                            box[boxexist(playerx, playery + 1)]["y"] = box[boxexist(playerx, playery + 1)]["y"] + 1
                            playery = playery + 1
                            moves = moves + 1
                        end
                    end
                else
                    playery = playery + 1
                    moves = moves + 1
                end
            end
        elseif (key == "d") then
            if (map[playery][playerx + 1] == 0) then
                if (boxexist(playerx + 1, playery) ~= 0) then
                    if (boxexist(playerx + 2, playery) == 0) then
                        if map[playerx + 2][playery] == 0 then
                            box[boxexist(playerx + 1, playery)]["x"] = box[boxexist(playerx + 1, playery)]["x"] + 1
                            playerx = playerx + 1
                            moves = moves + 1
                end
                    end
                else
                    playerx = playerx + 1
                    moves = moves + 1
                end
            end
        elseif (key == "w") then
            if (map[playery - 1][playerx] == 0) then
                if (boxexist(playerx, playery - 1) ~= 0) then
                    if (boxexist(playerx, playery - 2) == 0) then
                        if map[playerx][playery - 2] == 0 then
                            box[boxexist(playerx, playery - 1)]["y"] = box[boxexist(playerx, playery - 1)]["y"] - 1
                            playery = playery - 1
                            moves = moves + 1
                        end
                    end
                else
                    playery = playery - 1
                    moves = moves + 1
                end
            end
        end
    end
end


조회 수 :
913
등록일 :
2013.09.18
08:05:48 (*.209.135.92)
엮인글 :
게시글 주소 :
https://hondoom.com/zbxe/index.php?mid=study&document_srl=703968
List of Articles
번호 제목 글쓴이 날짜 조회 수sort
185 express.js 세션 적용 후 리다이렉트 시 세션 적용이 제대로 안 되는 문제점 노루발 2024-02-07 4
184 Bootstrap4 container class가 적용된 div의 양 옆에 설정하지 않은 margin이 생김 노루발 2024-02-07 5
183 리캡챠 적용 [1] 노루발 2021-01-08 11
182 certbot을 이용한 HTTPS 인증서 발급 및 적용 노루발 2021-01-12 18
181 love2d에서 안드로이드 터치 제스처 인식하기 노루발 2020-11-12 20
180 Lua-love2d TCP 통신 [1] 노루발 2023-07-14 21
179 illegal character 방지 [3] 노루발 2023-07-17 22
178 Lua 클래스 만들고 활용하기 노루발 2020-11-06 23
177 Lua 테이블 안에 함수 저장하기 노루발 2020-11-06 28
176 루아 스타일 가이드 노루발 2020-11-19 33
175 Lua 인수로 nil값이 들어왔을 경우 처리하기 노루발 2020-11-06 36
174 이쁜 눈나가 유니티 개발 알려주는 재생목록 노루발 2020-11-12 37
173 Love2d 이미지 하얗게 그리기 노루발 2020-11-23 42
172 Love2d 게임 안드로이드로 패키징하기 노루발 2021-01-11 48
171 특정좌표를 기준으로 zoom in/zoom out하기 노루발 2020-11-11 58
170 Windows To Go와 R-Studio를 이용한 손실된 데이터 복구하기 노루발 2020-01-30 89
169 Oracle cloud에 Nginx/MariaDB 설치하기 노루발 2020-12-06 93
168 Love2d DPI 이슈 해결 [3] 노루발 2019-06-29 97
167 Love2d로 만든 로그라이크 예제 노루발 2020-11-30 252
166 love.update(dt) 에서 버벅이는 현상. 노루발 2013-09-17 256